Stop leaks at the source and extend your AWD system's lifespan with the OEM Nissan Transfer Case Output Shaft Seal – Inner (Part #33142-4BA0C). This factory-grade seal fits into the inner bore of the transfer case, providing a critical fluid barrier where the output shaft connects internally.

Transfer Case Output Shaft Seal – Inner (33142-4BA0C) – OEM Replacement Part for Nissan AWD Models

This seal prevents transmission or transfer case fluid from escaping internally, ensuring the driveline remains properly lubricated and pressure-balanced under all driving conditions. Ideal for both leak repair and proactive maintenance.

Specifications:
Part Type: Transfer Case Inner Output Shaft Oil Seal
Function: Maintains internal oil containment at the transfer case output shaft
Construction: OEM-grade rubber with molded steel core
Position: Inner bore of transfer case (shaft-side seal)
Includes: One Nissan genuine inner output seal

Compatible Nissan Models:
2018–Present Nissan Altima – L34US (AWD)
2024–Present Nissan Kicks – P16XUS
2014–2024 Nissan Murano – Z52US
2016–2020 Nissan Rogue Hybrid – T32HVUUS
2016–2020 Nissan Rogue (JP, KRA) – T32JUS / T32DUS
2017–2023 Nissan Rogue Sport – J11US
2020–Present Nissan Rogue – T33US / T33UUS
Check compatibility here by entering your VIN before ordering

Important Service Note – Replace All Seals Together:
When servicing this inner output shaft seal, Nissan strongly recommends replacing the complete transfer case seal group to avoid recurring leaks and extra labor costs. This includes:

• Pinion Seal (33114-4BA0B)

• Outer Transfer Case Seal (33142-4BA0A)

• O-Ring Seal (38343-4BB0B)

Replacing all four together ensures full sealing integrity and proper component alignment.

Key Features:

• Factory-grade oil seal built to withstand internal pressure and heat

• Direct fit with OE transfer case housing and shaft tolerances

• Prevents gear oil leaks that can lead to overheating or damage

• Ideal for high-mileage or leak-prone AWD systems

• Nissan-tested for long-term performance and reliability

Failing to Replace This Seal Can Lead To:

• Internal Gear Oil Leaks – Causes low fluid levels and overheating

• Contaminated Fluid – Dirt and debris entering the transfer case

• Driveline Noise or Vibration – From dry bearings or worn seals

• Transfer Case Failure – Premature wear from fluid starvation

• Repeat Labor Costs – If seal group isn’t replaced together

Related Components to Inspect or Replace:

• All Transfer Case Seals (especially 33142-4BA0A and 38343-4BB0B)

• Driveshaft output yoke and splines

• AWD fluid – replace if any seals were leaking

• Mounting hardware or bushings that affect shaft alignment

• Transfer case housing for scoring or wear near seal surfaces

Order with Confidence:
Order the Transfer Case Inner Output Shaft Seal (33142-4BA0C) today and complete your AWD repair the right way. A simple seal replacement can prevent costly drivetrain damage and restore proper fluid control.

Restore Your Nissan with Genuine Accessories!
Looking to restore your Nissan? We offer factory-direct Nissan accessories at competitive prices, including all-weather floor mats, pet accessories, roof carriers, and wheel locks. Whether you're restoring protection, style, or utility, shop genuine Nissan parts and accessories all in one place!

Why Buy OEM Nissan Parts from Chapman Nissan?
Every OEM part listed on our site is genuine from Nissan, built to exact factory specs for fit, function, and safety. Unlike aftermarket parts, our components are tested to work seamlessly with your vehicle’s onboard systems — including sensors, ECM logic, and emission controls.

• Fast, secure shipping from a certified Nissan dealer

• VIN check available to ensure compatibility

• Trusted by Nissan owners and professional technicians

Note: To avoid issues with return eligibility or fitment, please verify your VIN before ordering. This part is non-returnable if installed.

Rogue. Side. From 11/2020.

Stop leaks at the source and extend your AWD system's lifespan with the OEM Nissan Transfer Case Output Shaft Seal – Inner (Part #33142-4BA0C). This factory-grade seal fits into the inner bore of the transfer case, providing a critical fluid barrier where the output shaft connects internally.

Transfer Case Output Shaft Seal – Inner (33142-4BA0C) – OEM Replacement Part for Nissan AWD Models

This seal prevents transmission or transfer case fluid from escaping internally, ensuring the driveline remains properly lubricated and pressure-balanced under all driving conditions. Ideal for both leak repair and proactive maintenance.

Specifications:
Part Type: Transfer Case Inner Output Shaft Oil Seal
Function: Maintains internal oil containment at the transfer case output shaft
Construction: OEM-grade rubber with molded steel core
Position: Inner bore of transfer case (shaft-side seal)
Includes: One Nissan genuine inner output seal

Compatible Nissan Models:
2018–Present Nissan Altima – L34US (AWD)
2024–Present Nissan Kicks – P16XUS
2014–2024 Nissan Murano – Z52US
2016–2020 Nissan Rogue Hybrid – T32HVUUS
2016–2020 Nissan Rogue (JP, KRA) – T32JUS / T32DUS
2017–2023 Nissan Rogue Sport – J11US
2020–Present Nissan Rogue – T33US / T33UUS
Check compatibility here by entering your VIN before ordering

Important Service Note – Replace All Seals Together:
When servicing this inner output shaft seal, Nissan strongly recommends replacing the complete transfer case seal group to avoid recurring leaks and extra labor costs. This includes:

• Pinion Seal (33114-4BA0B)

• Outer Transfer Case Seal (33142-4BA0A)

• O-Ring Seal (38343-4BB0B)

Replacing all four together ensures full sealing integrity and proper component alignment.

Key Features:

• Factory-grade oil seal built to withstand internal pressure and heat

• Direct fit with OE transfer case housing and shaft tolerances

• Prevents gear oil leaks that can lead to overheating or damage

• Ideal for high-mileage or leak-prone AWD systems

• Nissan-tested for long-term performance and reliability

Failing to Replace This Seal Can Lead To:

• Internal Gear Oil Leaks – Causes low fluid levels and overheating

• Contaminated Fluid – Dirt and debris entering the transfer case

• Driveline Noise or Vibration – From dry bearings or worn seals

• Transfer Case Failure – Premature wear from fluid starvation

• Repeat Labor Costs – If seal group isn’t replaced together

Related Components to Inspect or Replace:

• All Transfer Case Seals (especially 33142-4BA0A and 38343-4BB0B)

• Driveshaft output yoke and splines

• AWD fluid – replace if any seals were leaking

• Mounting hardware or bushings that affect shaft alignment

• Transfer case housing for scoring or wear near seal surfaces

Order with Confidence:
Order the Transfer Case Inner Output Shaft Seal (33142-4BA0C) today and complete your AWD repair the right way. A simple seal replacement can prevent costly drivetrain damage and restore proper fluid control.

Restore Your Nissan with Genuine Accessories!
Looking to restore your Nissan? We offer factory-direct Nissan accessories at competitive prices, including all-weather floor mats, pet accessories, roof carriers, and wheel locks. Whether you're restoring protection, style, or utility, shop genuine Nissan parts and accessories all in one place!

Why Buy OEM Nissan Parts from Chapman Nissan?
Every OEM part listed on our site is genuine from Nissan, built to exact factory specs for fit, function, and safety. Unlike aftermarket parts, our components are tested to work seamlessly with your vehicle’s onboard systems — including sensors, ECM logic, and emission controls.

• Fast, secure shipping from a certified Nissan dealer

• VIN check available to ensure compatibility

• Trusted by Nissan owners and professional technicians

Note: To avoid issues with return eligibility or fitment, please verify your VIN before ordering. This part is non-returnable if installed.

Rogue. Side. From 11/2020.